PRIMING: Before using the Athos tank or a new coil for the first time, "Prime" the coil by adding 5 drops of eliquids on the cotton, install the coil into the tank, then fill the tank and stand it uprightfor 5 minutes. This will avoid burning the coil.
Do not let the tank become completely empty. Refill the tank to avoid dry burning or damage the atomiser.
To avoid leakages of e-liquid into your mouth piece or into the middle tube of the tank, make sure you refill the Aspire Athos tank using a needle point bottle or refill kit or a glass dripper.
Please be aware if you don’t refill your Aspire Athos tank properly, you might draw some eliquids to your mouth every time you vape, or your vaping experience might be disturb by a gurgling sounds caused by the excess of eliquid inside the middle tube of the tank.
Sub-ohm tanks and coils have a resistance which is under 1.0ohm. Sub ohm atomisers/coils tend to be bigger, as a result, it can utilise more power, eliquid and cover a greater area of wick. This combination results in massive vapour production.
High-powered device paired is required for sub-ohm vaping (a separate high-drain battery may be required - e.g. the Efest 18650 battery)
"Direct-to-lung" is the suggested vaping style for sub ohm devices (as opposed to "mouth-to-lung" - i.e. how a traditional cigarette would be smoked).
When using sub-ohms tank like the Aspire Athos tank, its highly recommended to use Subohm eliquids which VG ratio is higher than 80% and if using nicotine, it must be under 6mg, otherwise you will feel it peppery/harsh on your throat when vaping.
Priming: Whenever you install a new coil you will want to make sure you prime it before using it. Priming a coil will ensure that the wick is fully saturated with e-juice prior to its first use. This would substantially lower down the risk of burning the wick or damaging the coil. Check instruction before use.