The battery needs to be recharged when the unit produces a decreased vapour and/or the battery Orange indicator light blinks 10 times (Light of VV will blink 15times).The battery can be charged with a 4.2V output, 420mah charger . Use the Charger & Wall plug provided with the kit .
Using the CF Battery -
For first time use,turn the battery ON.
To turn battery ON/OFF, press button 5 times in succession in 2 seconds . The LED will blink 3 times (both blue and Orange lights) and the button will illuminate Blue when active and ON. Repeat this procedure to turn battery OFF
Charging Instructions -
Unscrew the battery from the vaping components
Gently screw the battery into the USB charger
Plug the USB into the supplied wall charger or computer
The battery will flash 3 times and then turn in solid in colour (Orange light in 3.2-3/5V, blue light in 3.5-4.15V)
The light on the USB charger will be red when charging
Once fully charged, the USB charger will display a green light, and the LED light on battery will turn OFF
Prior to refilling SB6 Clearomiser, make sure the coil head is screwed on tightly to the stem body inside the SB6 Clearomiser. Be aware if the coil is loose, no power will run from the battery to the clearomiser, therefore you will not be able to draw any vapour.
Refill with maximum 1.6ml. Do not overfill.
Replace SB6 Coil Heads weekly or once a burnt taste appears, SB6 clearomiser stop working or the amount of vapour produced decreases.
Wash mouthpiece and tank of SB6 clearomiser every time you replace coil heads.
Priming the coils:
Once you have refill the SB6 clearomiser, and prior to screwing it to the battery; prime the coil by lightly blowing air through the mouthpiece about 5 times, and wait 3 minutes before you start vaping.
Do not charge Aspire CF G-power batteries with chargers different from the ones supplied with your kit: Aspire USB cable and Soulblu Wall Charger. Alternatively you can use Soulblu Car charger connected to Aspire USB cable.
Keep Aspire CF G-Power Vaporiser and eliquids away from high temperatures.
Make sure you dry any mist off the battery fitting before you screw the Aspire USB cable, by using a cotton butt or the corner of a paper tower. This avoids accumulation of e-liquid which might short your batteries.
Please don’t keep your vaporisers inside your pockets, as they might become too hot and a fire hazard might arise.