Aspire Speeder 200W Kit, is a combination of the latest new high power Speeder mod and Athos tank. The Speeder is a dual bay removable 18650 battery mod which delivers up to 200 watts (yes that’s right, 200 watts!) of power. The kit also comes with a partner tank developed especially to make best use of the power available “the Athos tank”. The Athos tank utilize our innovative penta-coil head to satisfy those who prefer both dense clouds and top-notch flavour. It comes with a standard version which is 4ml tank. The all new innovative Athos coil heads, made for flavour, made for power.
Battery: 2 x 18650 battery (not included with MOD only option)
New Customisable power setting mode
Automatically rotating screen
Ergonomic streamline design
Tri-coil head (left) is rated at 0.3 ohms and the recommended power setting is 60-75 watts.
For those wanting even higher vapour production the new Penta-coil head (right) five coils in one head rated at 0.16 ohms with a with a recommended power setting of 100-120 watts. Truly a power vapers’ dream for sub-ohm tanks.
Easy Refilling Process – Athos tank with ease of use in mind, and it couldn’t be easier than filling this tank from the top.
Whichever tank you choose to use with the Aspire Speeder 200W MOD, you must prime the tank/coil prior to using it the first time: start vaping at low wattage (7watts). Take minimum 5 -10 puff before you start incrementing the wattage progressively by 1 watt, to the minimum recommended resistance as stated on each coil head.
ABOUT SUB-OHMS TANKS
Sub-ohms tanks use coils which resistance is under 1ohm
Aspire Speeder 200W is designed for sub-ohm vaping when using coils rated less than 1Ohms. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank.
Be aware to only use e-liquid with less than 6mg of nicotine for sub-ohming, and PG/VG ratio containing 60-80% VG, as your vapour may taste harsh otherwise. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.
ABOUT RECHARGING THE BATTERY
Do not charge Aspire Speeder 200W mod with chargers different from the ones supplied with your kit and an Electrical safety approved wall charger “Soulblu Wall Charger”. Alternatively you can use Soulblu Car charger connected to provided chargers with the kit.
Clean (dry) the threaded fitting of your MOD every time you recharge your batteries, to avoid shortage.
MAINTENANCE AND CARE
Make sure the Aspire Athos subohm Tank, doesn’t leak eliquid into the fitting of the MOD. Follow the instruction on how to use the tank properly to avoid leakage.
Change the coil head periodically when vaping start tasting burnt or the amount of vapour produced start declining significantly or the LED screen displays “check atomiser”
KEEPING BATTERIES SAFE
Always carry batteries in a battery case, do not carry or store them loose or near metallic objects.
Always keep your batteries dry and away from water.
Never expose your batteries to an open flame.
Visually inspect your batteries regularly. If the wrapper is damaged in any way DO NOT USE IT. It is important to either replace the battery or take the battery to a shop to have it re-wrapped or replaced.
Do not overcharge or over discharge your batteries. If a battery has been over charged/discharged DO NOT USE IT and properly discard it.
Do not charge your batteries unattended or while sleeping.
Check on charging batteries periodically (recommended every 30 min) and promptly remove them from the charger as soon as they finished charging.
Do not expose your battery extreme temperatures both heat and cold.