Recently added item(s) ×
You have no items in your shopping cart.
The most innovative feature of the Marquis are the coil rods which can be used to build and install the coils. Once the coils are wrapped on the rods, the rods are inserted into holes in the bottom of the deck which allow coil placement precisely in front of the air holes in the deck. Additionally, the rods hold the coils in place which makes trapping the positive and negative leads a humorously easy task. Aiding in the ease of building is the crowned positive post. The raised tabs on the post allow you to capture your positive leads before securing them with the flanged positive screw.
The top cap of the Marquis features a removable lid to facilitate easy dripping and accommodates the included drip tip and two drip tip adapters, allowing the user to utilize any standard 510 drip tip of their choosing.
The two 2mm airflow holes run horizontally through the raised portion of the deck and the three holes in the top cap allow either single or dual coil builds.
510 threading w/ fixed copper center screw
22mm outside diameter.
32.5mm overall height w/o drip tip
Dual ground screws easy dual coil setup
Dual coil/single coil capable
Innovative crown style center post with wire capture tabs
Vertical, horizontal or chimney coils
Cotton, silica, SS mesh, etc. wicking
Custom coiling rods in 2.5mm, 3.0mm, 3.5mm, 4.0mm diameters
Blind holes in liquid well for perfect coil allignment
6mm deep liquid well (approx.)
Double O-rings for a firm top cap seal
Adjustable airflow ( single and dual coil mode)
Removable lid (16mm) with heat insulator
Custom wide bore drip tip (8.7mm bore)
2x custom lid adapters for 510 style drip tips
Custom CNC engraved
Soulblu - Electronic Cigarettes & E Liquids Australia
Sign Up for Our Newsletter:
0411 688 339 ( +whatsApp)
Mon - Wed : 8:30am to 5:30pm
Thurs & Fri : 8:30am to 8:30pm
Sat & Sun : 10:00 am to 3:00pm