The Joyetech Cuboid Pro is packed full of features, including; a responsive touch screen, well designed UI, easy-to-go interface, tap button, vibration motor, 2A quick charge, multi-protections, power bank, preheat, real-time clock, custom wallpaper.
18650 X 2 – Effest batteries – NOT included with the kit
The 2.4inch touchscreen is intuitive and easy to use. Quickly change your settings and view your custom screensaver. Stay healthy with the built in pedometer that tracks your daily activity.
As well as your conventional firing button, the Cuboid Pro features TAPTEC™ technology that uses micro voltage signal gestures to detect your touch.Providing vibration feedback each time you press, this is a new way to fire your Cuboid Pro.
The dual removable 18650 batteries will fire your Joyetech Cuboid Pro up to 200W. Supporting quick charging, you can use the on-board USB port to update your firmware or charge your batteries.
Other Specifications and Features:
Dimensions:3-5/16" x 2-1/8" x 1-1/8"
Comfortably Fits 25mm and Smaller Tanks
New Flexible 510 Contact Pin (4mm to 5.5mm)
Temperature Control: Nickel, Titanium, Stainless Steel 316 and TCR Mode
Output Wattage: 1 - 200W
Temperature Control Range: 100 - 315C / 200 - 600F
Whichever tank you choose to use with the Joyetech Cuboid Pro up to 200W, you must prime the tank/coil prior to using it the first time: start vaping at low wattage (7watts). Take 5-10 puff before you start incrementing the wattage progressively by 1 watt, to the minimum recommended resistance as stated on each coil head.
ABOUT SUB-OHMS TANKS
Sub-ohms tanks use coils which resistance is under 1ohm
Joyetech Cuboid Pro 200W mod is designed for sub-ohm vaping when using a tanks with coils under 1 Ohms. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank.
Be aware to only use e-liquid with less than 6mg of nicotine for sub-ohming, and PG/VG ratio containing 60-80% VG, as your vapour may taste harsh otherwise. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.
ABOUT RECHARGING THE BATTERY
Do not charge Joyetech Cuboid Pro up to 200W mod with chargers different from the ones supplied with your kit and an Electrical safety approved wall charger “Soulblu Wall Charger”. Alternatively you can use Soulblu Car charger connected to provided chargers with the kit.
Clean (dry) the threaded fitting of your MOD every time you recharge your batteries, to avoid shortage.
MAINTENANCE AND CARE
Make sure your Tank system, or clearomiser doesn’t leak eliquid into the fitting of the MOD *(Follow instruction on how to use the tank or clearomiser properly to avoid leakage.
Change the coil head periodically when vaping start tasting burnt or the amount of vapour produced start declining significantly or the LED screen displays “check atomiser”
KEEPING BATTERIES SAFE
Always carry batteries in a battery case, do not carry or store them loose or near metallic objects.
Always keep your batteries dry and away from water.
Never expose your batteries to an open flame.
Visually inspect your batteries regularly. If the wrapper is damaged in any way DO NOT USE IT. It is important to either replace the battery or take the battery to a shop to have it re-wrapped or replaced.
Do not overcharge or over discharge your batteries. If a battery has been over charged/discharged DO NOT USE IT and properly discard it.
Do not charge your batteries unattended or while sleeping.
Check on charging batteries periodically (recommended every 30 min) and promptly remove them from the charger as soon as they finished charging.
Do not expose your battery extreme temperatures both heat and cold.