The Sigelei Kaos Z box Mod is a powerful variable wattage device that produces 200 watts of power (30W less than its predecessor) and the installed Sigelei manufactured microchip offers exceptional performance and better temperature control monitoring than its namesake. As far as high-powered, dual battery mods go, there are literally endless choices to suit every budget and design preference imaginable. Visual circuitry, flashing lights and bright colours appear to be the design ethos of late.
Other Specifications and Features
Measurements: 86.7mm x 51.4mm x 26.8mm
Constructed from zinc alloy
Transparent side panels
0.96″ TFT display screen
510 threaded connection
Works with two external 18650 batteries ( Batteries not included)
Modes: VW, TC SS, TC Ti, TC Ni200, TCR
Power range: 10W to 200W
Resistance range: 0.05Ω to 3.0Ω
Temperature range: 100°C to 300°C or 200°F to 570°F
Whichever tank you choose to use with the Sigelei Kaos Z MOD, you must prime the tank/coil prior to using it the first time: start vaping at low wattage (7watts). Take minimum 5 -10 puff before you start incrementing the wattage progressively by 1 watt, to the minimum recommended resistance as stated on each coil head.
ABOUT SUB-OHMS TANKS
Sub-ohms tanks use coils which resistance is under 1ohm
Sigelei Kaos Z MOD is designed for sub-ohm vaping when using Tanks with coils rated less than 1.0 Ohms. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank.
Be aware to only use e-liquid with less than 6mg of nicotine for sub-ohming, and PG/VG ratio containing 60-80% VG, as your vapour may taste harsh otherwise. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.
ABOUT RECHARGING THE BATTERY
Do not charge Sigelei Kaos Z MOD mod with chargers different from the ones supplied with your kit and an Electrical safety approved wall charger “Soulblu Wall Charger”. Alternatively you can use Soulblu Car charger connected to provided chargers with the kit.
Clean (dry) the threaded fitting of your MOD every time you recharge your batteries, to avoid shortage.
MAINTENANCE AND CARE
Make sure your Tank system, or clearomiser doesn’t leak eliquid into the fitting of the MOD. Follow the instruction on how to use the tank or clearomiser properly to avoid leakage.
Change the coil head periodically when vaping start tasting burnt or the amount of vapour produced start declining significantly or the LED screen displays “check atomiser”
KEEPING BATTERIES SAFE
Always carry batteries in a battery case, do not carry or store them loose or near metallic objects.
Always keep your batteries dry and away from water.
Never expose your batteries to an open flame.
Visually inspect your batteries regularly. If the wrapper is damaged in any way DO NOT USE IT. It is important to either replace the battery or take the battery to a shop to have it re-wrapped or replaced.
Do not overcharge or over discharge your batteries. If a battery has been over charged/discharged DO NOT USE IT and properly discard it.
Do not charge your batteries unattended or while sleeping.
Check on charging batteries periodically (recommended every 30 min) and promptly remove them from the charger as soon as they finished charging.
Do not expose your battery extreme temperatures both heat and cold.